Designed for use with a variety of VR Stitching software, such as that offered by Live Picture and others, the VR-3 facilitates easy alignment of Noblex Panoramic Photos, and can be used with all cameras in the Noblex line, from the 135mm series, as well as the 150 models ( 6 X 12 format) and the new 175 ( 6 X 17 format).  The VR-3 will also accommodate standard 35 mm as well as medium or large format cameras.

Manufactured in Dresden, Germany, the VR-3 provides three (3) indented click stops, at 0 degrees and at 240 degrees.  Other rotation angles can be easily adjusted with applied graduations of 15 degrees.  A locking screw insures rock steady alignment of the VR-3 on the Nodal point of the camera.  Two tubular levels situated laterly and at a distance of 90 degrees guarantee permanent control of adjustment.

Noblex Panoramic photos, with a feld of view from 136 degrees  (135mm models) to 146 degrees  ( 150 models), are easily formatted in stiching software programs when using the VR-3.  As only three (3) Noblex photos are needed to complete a 360 degree panorama, input and production time is relatively quick and easy.  See images below.  It is, of course possible to use other cameras with a corresponding camera connection to obtain 360 degree exposures.  Tripod studs, both 1/4 as well as 3/8 are mounted on the bottom of the VR-3.